Bottle Un-Scrambler

Bottle Un-Scrambler

Description:-
The National automatic bottle un-scrambler is designed to provide a loading solution for empty containers and delivers them to the downstream equipment conveyor in upright condition after orientation. Machine is having a very robust and vibration free body constructed on steel frame. SS cladded body, and SS container contact parts ensures durability and GMP compliance. User friendly and variable speed controls for orientor and conveyor, make the bottle orientor easy to adjust and able to handle different bottle sizes and shapes.
Operation:-
Empty containers are loaded into the easy access bulk hopper. An elevator lifts the empty containers from the bulk hopper and deposits them into the centrifugal feeder. In the feeder containers are moved to the outside of the bowl and drop into the tooling channel. The tooling channel will ensure the container is in proper position to enter the spacing belt. The spacing belt maintains positive control over the containers and ensures properly timed containers enter the orientation belt work area. Spacing belt will determine the overall speed of the machine. As the containers enter the orientation area, gripper belts pull the container and hook will raise the container in upright position if the neck is exposed. Bottom exposed containers will pass through and all reach the pivot block then. Pivot block forces the containers to orient upright. Containers then pass from a gripper belts towards exit belt. Secondary landing plate keeps doing minor adjustments in orientation of the upright containers until it delivered on to the next conveyor.
Specifications:-
Technical Specification
  Model   Horizontal Sticker Labeling Machine
Direction of Movement Left to Right
Output / Hour* Up 4000 to 8000 bottles
Machine Dimension 2700 mm (L) x 1300 mm (W) x 1550 mm (H)
Height of Conveyor 860 mm to 910 mm
Electrical Specification**

Un - scrambler Motor 0.5 HP / 415 volt / 50 Hz / 1350 RPM
Bottle Elevator Motor 0.5 HP / 415 Volt / 50 Hz / 1350 RPM
Orientation Drive 0.54 Kw – 6 Nos.
No. of Operator 1
Input Specification
Container Specifications Diameter 28 mm to 100 mm
Height** 58 to 210 mm
* Depends on bottle size, cap size and type of cap.
** We can supply as per customer requirements.

 

UTILITY REQUIREMENT
Electrical Supply 3 Ø + Neutral + Earthing
Voltage & frequency 415V / 50 Hz AC
Electrical Load 1.3 KW
Inlet Air Pressure 5 To 6 Bar
Required air Quantity 0.5 CFM

Salient Features:-

  • Robust and vibration free construction.
  • Elegant matt finish body.
  • ACVFD for Elevator, feeder and orientor.
  • User friendly & maintenance less design.
  • Low noise lever at higher speed.
  • Contact parts are resistant to flaking, chipping, scuffing so will not cause any cosmetic damage to containers.
  • Confirms GMP and food standards.